MK Diamond Products Saw MK-170 User Manual download pdf (Page 10)

MK-170 Revision 02/02, Effective Date February 11, 2002

Page 10

SAFETY

PRODUCT SPECIFICATIONS:

The MK-170 is a versatile Tile Saw. Operated and used according to this manual, the MK-170 will provide

years of dependable service.

General Description:

The MK-170 Tile Saw is engineered as a tabletop or stand mounted wet tile saw. The saw includes a powerful

115v direct drive AC motor. The saw is capable of cutting tile up to twelve (12) inches in length and one and

three quarter (1-3/4) inches thick in one pass.

Motor Specifications:

Motor specifications for the MK-170 are listed in Table 2 below.

Voltage 115 v

Motor Amperage 5.0 a

Frequency 50/60 Hz

RPM 5500 rpm

Horse Power 1/3 hp

Weight 15 lbs.

Table 2

Blade Capacity:

The MK-170 uses a seven (7) inch (178 mm) diameter, wet cutting continuous rim, MK Diamond blade with a

five-eighths (5/8) inch (15.875 mm) arbor.

Tile Types:

The MK-170 can cut a variety of tile types including Porcelain, Terracotta, Marble, Quarry and Slate, or almost

any other non-ferrous material.

NOTE:

The MK-170 is not designed to cut plastic or ferrous (metals) material.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

No comments

MK Diamond Products Saw MK-170 User Manual Page 10