MK Diamond Products MK-112 Owner's Manual download pdf (Page 19)

MK-101 SETUP

Prior to beginning work, a pre-start inspection of the saw should be performed.

1. To prevent the possibility electrical shock, the MK-101 MUST be

de-energized when connecting the Water Pump.

2. To prevent the possibility of electrical shock, use only MK Diamond qualied

replacement parts

NOTE: To prevent pump damage, the Water Pump must be disconnected if cutting with a Dry Blade.

(A)

Ensure the ON/OFF Switch is in

the OFF position

(B)

Verify the Movable Cutting

Table moves freely

(C)

Inspect the Diamond Blade for

damage – verify the blade is

correct for the material being cut

(D)

Inspect the Pump Assembly for

damage – ensure the cord is

free of cracks or cuts

(E)

Inspect the MK-101 for damage

WARNING

PRE-START INSPECTION

CONNECTING THE WATER PUMP

(A)

Connect the Cooling Trans-

fer Tube to the inlet connec-

tion of the Blade Guard

(B)

Connect the Water Pump power

cord to the connection found on

the back of the motor

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

No comments

MK Diamond Products MK-112 Owner's Manual Page 19